Senin, 28 Maret 2011

Main function of the UPS

Uninterruptible power supply (UPS abbreviated) is a device that typically uses a battery backup as an alternative power ration, to May provide uninterrupted power supply for electronic devices attached. UPS is an electrical power supply system which is very important and necessary as well as serve as a fortress of power failure and damage to systems and hardware. UPS systems will become a very important and very necessary in many telecommunications service providers, information services, Internet service providers and more. Can imagine how big their losses related to power failure if the system is not protected by UPS.

description :
Transformer: Min 4 ampere or more
Diode|Dioda: Min 5 ampere or more
Irfz 44: Paste cooling plate

When normal PLN Electricity, of the adapter (the series of the most left) will produce voltage 12 - 13 volt / 5 ampaere. This voltage is used to fill mengoprasikan UPS batery and therefore this UPS if you plan to load a higher modifikasilah of this series that have a higher ampere. PLN electricity when dead, the source voltage in the switch to akan bateray

When electricity PLN suppressed, the source voltage will switch to the battery. ups that may be living longer while the power off, use battery who have ampere / hour high (large) or can also install some of the ways in parallel battery

UPS serves to ensure that electronic devices will still get power when a sudden flow of electricity to die. UPS will be automatically switched to the speed of 0.004 seconds of electric current to power the batteries, so that electronic devices remain lit.

UPS is a lot used primarily for electronic devices that need to be constantly on during the work, such as a PC (personal computer). The electric current sudden death also can result in damage to computer equipment. We know that PLN often conduct electrical current extinction without prior notice, or make cuts in business hours.

From the characteristic wave UPS can be divided into 2 parts, namely:

1. UPS Sin wave (sine) wave forms such as electricity PLN

2. UPS step-square/modified sinwave, square waveform

Main function of the UPS
1. Can provide temporary electrical energy when a power failure at the main power.
Provide adequate time opportunity to immediately turn on the main electricity generator as a substitute.
2. Provide adequate time opportunity to immediately back up your data and secure the [operating system] (OS) to perform shutdown procedures when the main power outages.
3. Securing computer systems from electrical disturbances that can disrupt a computer system in the form of damage to software, data or hardware damage.
4. UPS automatically to perform the stabilization voltage when the input voltage changes so that the output voltage used by the computer system in the form of the stable voltage.
5. UPS can do the diagnosis and management of his own making it easier for users to anticipate if there will be disruption to the system.
User friendly and easy in installation.
Users can control the UPS via a LAN network by adding a few accessories are required.
9. Can be integrated with the Internet network.
10. Notification in case of failure by setting the UPS management software.

2 komentar:

  1. A great article explaining UPS, fortunately I have a Panther ups already prior to reading this. I like how you well defined your ideas. Great!

  2. That makes my choice of buying a
    uninterruptible power supply in the Philippines
    easier. Is the battery replaceable via DIY or should I need a professional?