Multilayer Ceramic Capacitor

Raw material for the capacitor is equal to the type of ceramic capacitors, there is difference in the number of layers that make up the dielectric. In this type of dielectric is prepared with many layers or commonly referred to as the layer with thickness of 10 to 20 μm and the plate electrode is made of pure metal. In addition, small size and have a better temperature characteristic than ceramic capacitors. Usually this kind either used to pass high frequencies to the ground.
Polyester Film Capacitor

These capacitors have a higher tolerance value of the polyester film capacitor. In general, the capacitance of this component will not change if they are designed in a system where the frequency through which less than or equal to 100KHz. In addition to the picture shown polypropylene of capacitor tolerance ± 1%.
Polypropylene Capacitor

These capacitors have a higher tolerance value of the polyester film capacitor. In general, the capacitance of this component will not change if they are designed in a system where the frequency through which less than or equal to 100KHz. In the figure shown alongside polypropylene capacitors with a tolerance of ± 1%.
Mica Capacitors

Polystyrene Film Capacitor

Electric Double Capacitor (Super Capacitor)

Trimmer capasitor

Capacitors of this type using a ceramic or plastic as the dielectric material. The value of the capacitor can be changed - change by turning screws located thereon. In the playback is expected to use a special screwdriver, so as not to cause the effect of capacitance between a screwdriver by hand.
Tuning Capacitor

Tidak ada komentar:
Posting Komentar