DC power

The PS10 power supply provide +15 Volt and -15 Volt regulated DC power at up to 250 mA of current per output. The two outputs have a common ground connection. The outputs are short circuit proof. A thermal protection turns the outputs off when the circuit is overheated. A low input to output stray capacitance guaranties a low AC leakage current and makes the PS10 well suited in applications where low hum and noise is important, such as low level pre-amplifiers and audio applications. The PS10 uses a dual winding AC transformer. A Light Emitting Diode at each output indicates proper output voltage.

Specifications
Output voltage: . . . . . . . . . . . . . +/- 15 Volt, +/- 5%
Max continuous output current:. . . . . . 250 mA each channel
Output short circuit current: . . . . . . 1.5A, typical.
Nominal input voltage:. . . . . . . . . . 115/230VAC, 50/60 Hz
Output voltage ripple:. . . . . . . . . . less than 10mV, @ 60 Hz, 250 mA load
Output voltage regulation:. . . . . . . . better then 10 mV
Input to Output capacitance:. . . . . . . 50 pF Max.
Dimensions (L X W X H): . . . . . . . . . 4.3" X 2.0" X 1.5"
Ordering Information

PS10-B Bare board with manual
PS10-K Kit with manual and all parts
PS10-A Fully assembled and tested
PS10-M Manual only